When was the last time the roof of your building was inspected? If it has been awhile, the roof may have problems lurking that require immediate attention. Some roof problems cause obvious signs such as for example leaks, while some produce subtle signs that are only detectable on the surface. In either case, leaving the problems unaddressed can cost you thousands once you finally repair them. If the roof on your own building has the problems listed below, a company that specializes in commercial roofing should repair them quickly:
Buckled Panels
Roof panels buckle due to weather damage and poor installation. Whatever the cause, the buckling allows wind to blow within the panels, making them loose. Because the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Buckled panels are perhaps one of the most commonly fixed problems by companies that perform roof repair.
Expended Screw Holes
Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen round the screws that hold the panels set up. This creates a space where water can leak underneath the panels and soak the roof deck. After the deck becomes saturated, the problem is costly to fix.
Blistering
Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and allow water to seep beneath the bitumen. Once the blisters form, hot weather typically makes them worse. Because of the humid subtropical climate in some regions of the country, commercial roofing frequently experiences blistering.
Ponding Water
Blocked drains and improper sloping could cause water to assemble in small ponds on a roof. Repairing a blocked drain is easy, but fixing a sloping problem is more technical. Often, installing Roof Cleaning in Spalding to establish a new slope is the greatest solution. During the rainy season, resolving ponding water is probably the most common forms of roof repair.
Loose Flashing
Flashing prevents water from seeping in the crevice where in fact the roof abuts to protrusions such as for example chimneys and vents. Over time, most flashing must be resealed. If it is not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.
Missing Mortar
Chimneys and high elements of brick walls that have parts of missing mortar could cause leaks. These leaks tend to be recognised incorrectly as leaks in the roof membrane, but an intensive inspection by a company that specializes in commercial roofing will reveal the real problem. Most parts of missing mortar could be repaired with basic tuck pointing procedures.
Conclusion
The problems above are some of the most common known reasons for roof repair. When they are corrected early, most problems are inexpensive to fix, however, not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is best solution to ensure problems are detected early.